cfg: Add config file variants using the ftdi driver instead of ft2232

[fw/openocd] / tcl / interface / ftdi / dp_busblaster.cfg

diff --git a/tcl/interface/ftdi/dp_busblaster.cfg b/tcl/interface/ftdi/dp_busblaster.cfg
new file mode 100644 (file)
index 0000000..51a59e1
--- /dev/null
+++ b/tcl/interface/ftdi/dp_busblaster.cfg
@@ -0,0 +1,23 @@
+#
+# Dangerous Prototypes - Bus Blaster
+#
+# The Bus Blaster has a configurable buffer between the FTDI FT2232H and the
+# JTAG header which allows it to emulate various debugger types. It comes
+# configured as a JTAGkey device.
+#
+# http://dangerousprototypes.com/docs/Bus_Blaster
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, but is assumed to work as this"
+echo "interface uses the same layout as configs that were verified. Please report your"
+echo "experience with this file to openocd-devel mailing list, so it could be marked"
+echo "as working or fixed."
+
+interface ftdi
+ftdi_device_desc "Dual RS232-HS"
+ftdi_vid_pid 0x0403 0x6010
+
+ftdi_layout_init 0x0c08 0x0f1b
+ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
+ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800