cfg: Add config file variants using the ftdi driver instead of ft2232

[fw/openocd] / tcl / interface / ftdi / calao-usb-a9260-c02.cfg

diff --git a/tcl/interface/ftdi/calao-usb-a9260-c02.cfg b/tcl/interface/ftdi/calao-usb-a9260-c02.cfg
new file mode 100644 (file)
index 0000000..dc4dca8
--- /dev/null
+++ b/tcl/interface/ftdi/calao-usb-a9260-c02.cfg
@@ -0,0 +1,22 @@
+#
+# CALAO Systems USB-A9260-C02
+#
+# http://www.calao-systems.com/
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, but is assumed to work as this"
+echo "interface uses the same layout as configs that were verified. Please report your"
+echo "experience with this file to openocd-devel mailing list, so it could be marked"
+echo "as working or fixed."
+
+interface ftdi
+ftdi_device_desc "USB-A9260"
+ftdi_vid_pid 0x0403 0x6001
+
+ftdi_layout_init 0x0c08 0x0f1b
+ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
+ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
+
+script interface/calao-usb-a9260.cfg
+script target/at91sam9260minimal.cfg