tcl/interface: add SPDX tag

[fw/openocd] / tcl / interface / buspirate.cfg

diff --git a/tcl/interface/buspirate.cfg b/tcl/interface/buspirate.cfg
index c2f3a83c412e592f3ef00bccde4b3986467cba98..8f613a764581c13d1a5fc4b41232a0b7daaa1bea 100644 (file)
--- a/tcl/interface/buspirate.cfg
+++ b/tcl/interface/buspirate.cfg
@@ -1,26 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # Buspirate with OpenOCD support
 #
 # http://dangerousprototypes.com/bus-pirate-manual/
 #
 
-interface buspirate
+adapter driver buspirate
 
 # you need to specify port on which BP lives
-#buspirate_port /dev/ttyUSB0
+#buspirate port /dev/ttyUSB0
 
 # communication speed setting
-buspirate_speed normal ;# or fast
+buspirate speed normal ;# or fast
 
 # voltage regulator Enabled = 1 Disabled = 0
-#buspirate_vreg 0
+#buspirate vreg 0
 
 # pin mode normal or open-drain (jtag only)
-#buspirate_mode normal
+#buspirate mode normal
 
 # pullup state Enabled = 1 Disabled = 0
-#buspirate_pullup 0
+#buspirate pullup 0
 
 # this depends on the cable, you are safe with this option
 reset_config srst_only
-