# http://dangerousprototypes.com/bus-pirate-manual/
#
-interface buspirate
+adapter driver buspirate
# you need to specify port on which BP lives
#buspirate_port /dev/ttyUSB0
# voltage regulator Enabled = 1 Disabled = 0
#buspirate_vreg 0
-# pin mode normal or open-drain
+# pin mode normal or open-drain (jtag only)
#buspirate_mode normal
# pullup state Enabled = 1 Disabled = 0
# this depends on the cable, you are safe with this option
reset_config srst_only
-