tcl/target: add SPDX tag

[fw/openocd] / tcl / interface / buspirate.cfg

diff --git a/tcl/interface/buspirate.cfg b/tcl/interface/buspirate.cfg
index 2b68538bf622388311510266f7b27f8f8f289c8e..20761d152628e038314ec87233327a9f2c762dcf 100644 (file)
--- a/tcl/interface/buspirate.cfg
+++ b/tcl/interface/buspirate.cfg
@@ -4,23 +4,22 @@
 # http://dangerousprototypes.com/bus-pirate-manual/
 #
 
-interface buspirate
+adapter driver buspirate
 
 # you need to specify port on which BP lives
-#buspirate_port /dev/ttyUSB0
+#buspirate port /dev/ttyUSB0
 
 # communication speed setting
-buspirate_speed normal ;# or fast
+buspirate speed normal ;# or fast
 
 # voltage regulator Enabled = 1 Disabled = 0
-#buspirate_vreg 0
+#buspirate vreg 0
 
-# pin mode normal or open-drain
-#buspirate_mode normal
+# pin mode normal or open-drain (jtag only)
+#buspirate mode normal
 
 # pullup state Enabled = 1 Disabled = 0
-#buspirate_pullup 0
+#buspirate pullup 0
 
 # this depends on the cable, you are safe with this option
 reset_config srst_only
-