# http://dangerousprototypes.com/bus-pirate-manual/
#
-interface buspirate
+adapter driver buspirate
# you need to specify port on which BP lives
-#buspirate_port /dev/ttyUSB0
+#buspirate port /dev/ttyUSB0
# communication speed setting
-buspirate_speed normal ;# or fast
+buspirate speed normal ;# or fast
# voltage regulator Enabled = 1 Disabled = 0
-#buspirate_vreg 0
+#buspirate vreg 0
-# pin mode normal or open-drain
-#buspirate_mode normal
+# pin mode normal or open-drain (jtag only)
+#buspirate mode normal
# pullup state Enabled = 1 Disabled = 0
-#buspirate_pullup 0
+#buspirate pullup 0
# this depends on the cable, you are safe with this option
reset_config srst_only
-