Add support for Bus Pirate as a JTAG adapter.

[fw/openocd] / tcl / interface / buspirate.cfg

diff --git a/tcl/interface/buspirate.cfg b/tcl/interface/buspirate.cfg
new file mode 100644 (file)
index 0000000..9c7e0e7
--- /dev/null
+++ b/tcl/interface/buspirate.cfg
@@ -0,0 +1,26 @@
+#
+# Buspirate with OpenOCD support
+#
+# http://dangerousprototypes.com/bus-pirate-manual/
+#
+
+interface buspirate
+
+# you need to specify port on which BP lives
+#buspirate_port /dev/ttyUSB0
+
+# communication speed setting
+buspirate_speed normal # or fast
+
+# voltage regulator Enabled = 1 Disabled = 0
+#buspirate_vreg 0
+
+# pin mode normal or open-drain
+#buspirate_mode normal
+
+# pullup state Enabled = 1 Disabled = 0
+#buspirate_pullup 0
+
+# this depends on the cable, you are safe with this option
+reset_config srst_only
+