contrib: replace the BSD-3-Clause license tag

[fw/openocd] / tcl / chip / st / spear / spear3xx.tcl

diff --git a/tcl/chip/st/spear/spear3xx.tcl b/tcl/chip/st/spear/spear3xx.tcl
index 660dab3baeb910ed4c353d26e90353994d846a66..474ebe316f57ae12dba1ebc2fb5ffbd0d97fc12e 100644 (file)
--- a/tcl/chip/st/spear/spear3xx.tcl
+++ b/tcl/chip/st/spear/spear3xx.tcl
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Generic init scripts for all ST SPEAr3xx family
 # http://www.st.com/spear
 #
@@ -19,7 +21,7 @@ proc sp3xx_clock_default {} {
        mww 0xfca00014 0x0ffffff8       ;# set pll timeout to minimum (100us ?!?)
 
        # DDRCORE disable to change frequency
-       set val [expr ([mrw 0xfca8002c] & ~0x20000000) | 0x40000000]
+       set val [expr {([mrw 0xfca8002c] & ~0x20000000) | 0x40000000}]
        mww 0xfca8002c $val
        mww 0xfca8002c $val ;# Yes, write twice!
 
@@ -29,7 +31,7 @@ proc sp3xx_clock_default {} {
        mww 0xfca80008 0x00001c0e       ;# enable
        mww 0xfca80008 0x00001c06       ;# strobe
        mww 0xfca80008 0x00001c0e
-       while { [expr [mrw 0xfca80008] & 0x01] == 0x00 } { sleep 1 }
+       while { [expr {[mrw 0xfca80008] & 0x01}] == 0x00 } { sleep 1 }
 
        # programming PLL2
        mww 0xfca80018 0xa600010c       ;# M=166, P=1, N=12
@@ -37,13 +39,13 @@ proc sp3xx_clock_default {} {
        mww 0xfca80014 0x00001c0e       ;# enable
        mww 0xfca80014 0x00001c06       ;# strobe
        mww 0xfca80014 0x00001c0e
-       while { [expr [mrw 0xfca80014] & 0x01] == 0x00 } { sleep 1 }
+       while { [expr {[mrw 0xfca80014] & 0x01}] == 0x00 } { sleep 1 }
 
        mww 0xfca80028 0x00000082       ;# enable plltimeen
        mww 0xfca80024 0x00000511       ;# set hclkdiv="/2" & pclkdiv="/2"
 
        mww 0xfca00000 0x00000004       ;# setting SYSCTL to NORMAL mode
-       while { [expr [mrw 0xfca00000] & 0x20] != 0x20 } { sleep 1 }
+       while { [expr {[mrw 0xfca00000] & 0x20}] != 0x20 } { sleep 1 }
 
        # Select source of DDR clock
        #mmw 0xfca80020 0x10000000 0x70000000 ;# PLL1
@@ -57,11 +59,12 @@ proc sp3xx_common_init {} {
        mww 0xfca8002c 0xfffffff8       ;# enable clock of all peripherals
        mww 0xfca80038 0x00000000       ;# remove reset of all peripherals
 
+       mww 0xfca80034 0x0000ffff       ;# enable all RAS clocks
+       mww 0xfca80040 0x00000000       ;# remove all RAS resets
+
        mww 0xfca800e4 0x78000008       ;# COMP1V8_REG
        mww 0xfca800ec 0x78000008       ;# COMP3V3_REG
 
-       mww 0xfca80050 0x00000001       ;# Enable clk mem port 1
-
        mww 0xfc000000 0x10000f5f       ;# init SMI and set HW mode
        mww 0xfc000000 0x00000f5f
 
@@ -77,3 +80,52 @@ proc sp3xx_common_init {} {
        mww 0xfca80098 0x80000007
        mww 0xfca8009c 0x80000007
 }
+
+
+# Specific init scripts for ST SPEAr300
+proc sp300_init {} {
+       mww 0x99000000 0x00003fff       ;# RAS function enable
+}
+
+
+# Specific init scripts for ST SPEAr310
+proc sp310_init {} {
+       mww 0xb4000008 0x00002ff4       ;# RAS function enable
+
+       mww 0xfca80050 0x00000001       ;# Enable clk mem port 1
+
+       mww 0xfca8013c 0x2f7bc210       ;# plgpio_pad_drv
+       mww 0xfca80140 0x017bdef6
+}
+
+proc sp310_emi_init {} {
+       # set EMI pad strength
+       mmw 0xfca80134 0x0e000000 0x00000000
+       mmw 0xfca80138 0x0e739ce7 0x00000000
+       mmw 0xfca8013c 0x00039ce7 0x00000000
+
+       # set safe EMI timing as in BootROM
+       #mww 0x4f000000 0x0000000f      ;# tAP_0_reg
+       #mww 0x4f000004 0x00000000      ;# tSDP_0_reg
+       #mww 0x4f000008 0x000000ff      ;# tDPw_0_reg
+       #mww 0x4f00000c 0x00000111      ;# tDPr_0_reg
+       #mww 0x4f000010 0x00000002      ;# tDCS_0_reg
+
+       # set fast EMI timing as in Linux
+       mww 0x4f000000 0x00000010       ;# tAP_0_reg
+       mww 0x4f000004 0x00000005       ;# tSDP_0_reg
+       mww 0x4f000008 0x0000000a       ;# tDPw_0_reg
+       mww 0x4f00000c 0x0000000a       ;# tDPr_0_reg
+       mww 0x4f000010 0x00000005       ;# tDCS_0_re
+
+       # 32bit wide, 8/16/32bit access
+       mww 0x4f000014 0x0000000e       ;# control_0_reg
+       mww 0x4f000094 0x0000003f       ;# ack_reg
+}
+
+
+# Specific init scripts for ST SPEAr320
+proc sp320_init {} {
+       mww 0xb300000c 0xffffac04       ;# RAS function enable
+       mww 0xb3000010 0x00000001       ;# RAS mode select
+}