zy1000: it has a CFI chip, no need for the ecosflash driver

[fw/openocd] / tcl / board / zy1000.cfg

diff --git a/tcl/board/zy1000.cfg b/tcl/board/zy1000.cfg
index 2e13ecbba49b8d0bfc7ea6e6cec195db8b7383ee..ee7afcd4cf99be0ac9db78e5444044f43b1843f3 100644 (file)
--- a/tcl/board/zy1000.cfg
+++ b/tcl/board/zy1000.cfg
@@ -31,14 +31,16 @@ if { [info exists CPUTAPID ] } {
 }
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # at CPU CLK <32kHz this must be disabled
 arm7_9 fast_memory_access enable
 arm7_9 dcc_downloads enable
 
-flash bank ecosflash 0x01000000 0x200000 2 2 $_TARGETNAME ecos/at91eb40a.elf
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x01000000 0x200000 2 2 $_TARGETNAME
+
 $_TARGETNAME configure -event reset-init {
        # Set up chip selects & timings
        mww 0xFFE00000 0x0100273D
@@ -63,9 +65,9 @@ $_TARGETNAME configure -event reset-init {
 
 # required for usable performance. Used for lots of
 # other things than flash programming.
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00020000 -work-area-size 0x20000 -work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0x00020000 -work-area-size 0x20000 -work-area-backup 0
 
-jtag_khz 16000
+adapter_khz 16000
 
 
 proc production_info {} {