Verdex: Add support for Gumstix Verdex boards.

[fw/openocd] / tcl / board / verdex.cfg

diff --git a/tcl/board/verdex.cfg b/tcl/board/verdex.cfg
new file mode 100644 (file)
index 0000000..6da9875
--- /dev/null
+++ b/tcl/board/verdex.cfg
@@ -0,0 +1,17 @@
+# Config for Gumstix Verdex XM4 and XL6P (PXA270)
+
+set CHIPNAME verdex
+source [find target/pxa270.cfg]
+
+# The board supports separate reset lines
+# Override this in the interface config for parallel dongles
+reset_config trst_and_srst separate
+
+# XM4 = 400MHz, XL6P = 600MHz...let's run at 0.1*400MHz=40MHz
+adapter_khz 40000
+
+# flash bank <driver> <base> <size> <chip_width> <bus_width>
+# XL6P has 32 MB flash
+flash bank $_CHIPNAME.flash0 cfi 0x00000000 0x02000000 2 2 $_TARGETNAME
+# XM4 has 16 MB flash
+#flash bank $_CHIPNAME.flash0 cfi 0x00000000 0x01000000 2 2 $_TARGETNAME