imx31pdk: use rclk w/1MHz fallback

[fw/openocd] / tcl / board / unknown_at91sam9260.cfg

diff --git a/tcl/board/unknown_at91sam9260.cfg b/tcl/board/unknown_at91sam9260.cfg
index 017f793f31f6468696656aacdbbd7514027df98b..845de6b96e0e3343627c25492856ae4bde81d83d 100644 (file)
--- a/tcl/board/unknown_at91sam9260.cfg
+++ b/tcl/board/unknown_at91sam9260.cfg
@@ -18,7 +18,7 @@ $_TARGETNAME configure -event reset-start {
         jtag_rclk 3
         halt
        # RSTC_MR : enable user reset, MMU may be enabled... use physical address
-        arm926ejs mww_phys 0xfffffd08 0xa5000501
+        mww phys 0xfffffd08 0xa5000501
 }
 
 
@@ -90,7 +90,8 @@ $_TARGETNAME configure -event reset-init {
 # Flash configuration
 #####################
 
-#flash bank cfi <base> <size> <chip width> <bus width> <target#>
-flash bank cfi 0x10000000 0x01000000 2 2 0
+#flash bank <name> cfi <base> <size> <chip width> <bus width> <target>
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x10000000 0x01000000 2 2 $_TARGETNAME