board: tp-link_tl-mr3020: add ath79 support

[fw/openocd] / tcl / board / tp-link_tl-mr3020.cfg

diff --git a/tcl/board/tp-link_tl-mr3020.cfg b/tcl/board/tp-link_tl-mr3020.cfg
index 0498d60c2a4bc890876fb5985a18d6655a74ae7a..7e040b32538a9c9fe4fe55ff544b99d5ae4625a0 100644 (file)
--- a/tcl/board/tp-link_tl-mr3020.cfg
+++ b/tcl/board/tp-link_tl-mr3020.cfg
@@ -34,11 +34,13 @@ proc ar9331_ddr1_init {} {
                                ;# Each bit represents a cycle of valid data.
 }
 
-$TARGETNAME configure -event reset-init {
+$_TARGETNAME configure -event reset-init {
        ar9331_25mhz_pll_init
        sleep 1
        ar9331_ddr1_init
 }
 
 set ram_boot_address 0xa0000000
-$TARGETNAME configure -work-area-phys 0xa1FFE000 -work-area-size 0x1000
+$_TARGETNAME configure -work-area-phys 0xa1FFE000 -work-area-size 0x1000
+
+flash bank flash0 ath79 0 0 0 0 $_TARGETNAME cs0