tcl/board: add SPDX tag

[fw/openocd] / tcl / board / ti_tmdx570ls20susb.cfg

diff --git a/tcl/board/ti_tmdx570ls20susb.cfg b/tcl/board/ti_tmdx570ls20susb.cfg
index 2601d21dfa056aa8675326a5cd41f38d40313d36..9c5ef74eaa23cb174cdbf84473dddaf0336506b8 100644 (file)
--- a/tcl/board/ti_tmdx570ls20susb.cfg
+++ b/tcl/board/ti_tmdx570ls20susb.cfg
@@ -1,9 +1,18 @@
-adapter_khz 1500
+# SPDX-License-Identifier: GPL-2.0-or-later
 
+# TMS570 Microcontroller USB Kit
+# http://www.ti.com/tool/TMDX570LS20SUSB
+
+# Board uses a FT2232H to emulate an XDS100v2 JTAG debugger
+# TODO: board also supports an SCI UART on the 2232's B Bus
 source [find interface/ftdi/xds100v2.cfg]
 
-set DAP_TAPID 0x0b7b302f
-set JRC_TAPID $DAP_TAPID
-source [find target/ti_tms570.cfg]
+# Processor is TMS570LS20216
+source [find target/ti_tms570ls20xxx.cfg]
 
 reset_config trst_only
+
+# xds100v2 config says add this to the end
+init
+ftdi set_signal PWR_RST 1
+jtag arp_init