setupTelo
#turn up the JTAG speed
adapter_khz 3000
- puts "JTAG speek now 3MHz"
- puts "type helpC100 to get help on C100"
+ echo "JTAG speek now 3MHz"
+ echo "type helpC100 to get help on C100"
}
$_TARGETNAME configure -event reset-deassert-post {
# Force target into ARM state.
-# soft_reset_halt # not implemented on ARM11
- puts "Detected SRSRT asserted on C100.CPU"
+# soft_reset_halt ;# not implemented on ARM11
+ echo "Detected SRSRT asserted on C100.CPU"
}
$_TARGETNAME configure -event reset-assert-post {
- puts "Assering reset"
+ echo "Assering reset"
#sleep 10
}
-proc power_restore {} { puts "Sensed power restore. No action." }
-proc srst_deasserted {} { puts "Sensed nSRST deasserted. No action." }
+proc power_restore {} { echo "Sensed power restore. No action." }
+proc srst_deasserted {} { echo "Sensed nSRST deasserted. No action." }
# boots from NOR on CS0: 8 MBytes CFI flash, 16-bit bus
flash bank $_FLASHNAME cfi 0x20000000 0x01000000 2 2 $_TARGETNAME
# writing data to memory does not work without this
-memwrite burst disable
\ No newline at end of file
+arm11 memwrite burst disable