tcl/board: add SPDX tag

[fw/openocd] / tcl / board / str910-eval.cfg

diff --git a/tcl/board/str910-eval.cfg b/tcl/board/str910-eval.cfg
index 0cf794aecedde62ab568ede79808792a086986c1..b6e9837720cff005c12b94e5a9c05e99d3bbfb62 100644 (file)
--- a/tcl/board/str910-eval.cfg
+++ b/tcl/board/str910-eval.cfg
@@ -1,8 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # str910-eval eval board
 #
 # Need reset scripts
 reset_config trst_and_srst
 
+# FIXME use some standard target config, maybe create one from this
+#
+#      source [find target/...cfg]
+
 if { [info exists CHIPNAME] } {
    set  _CHIPNAME $CHIPNAME
 } else {
@@ -15,7 +21,7 @@ if { [info exists ENDIAN] } {
    set  _ENDIAN little
 }
 
-if { [info exists FLASHTAPID ] } {
+if { [info exists FLASHTAPID] } {
    set _FLASHTAPID $FLASHTAPID
 } else {
    set _FLASHTAPID 0x04570041
@@ -23,22 +29,22 @@ if { [info exists FLASHTAPID ] } {
 jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID
 
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x25966041
 }
 jtag newtap $_CHIPNAME cpu   -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
-if { [info exists BSTAPID ] } {
+if { [info exists BSTAPID] } {
    set _BSTAPID $BSTAPID
 } else {
    set _BSTAPID 0x1457f041
 }
 jtag newtap $_CHIPNAME bs    -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
 $_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 1
 
 $_TARGETNAME configure -event reset-init {
@@ -54,10 +60,7 @@ $_TARGETNAME configure -event reset-init {
 }
 
 #flash bank str9x <base> <size> 0 0 <target#> <variant>
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash0
 flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash1
 flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0
-
-# For more information about the configuration files, take a look at:
-# openocd.texi