flash/nor/at91samd: Use 32-bit register writes for ST-Link compat

[fw/openocd] / tcl / board / stm32f4discovery.cfg

diff --git a/tcl/board/stm32f4discovery.cfg b/tcl/board/stm32f4discovery.cfg
index 990ee3284b529de361ee0869fb1ab48f7e6a05a3..714f1e90322916c90b4b6f05642fd2ff30427002 100644 (file)
--- a/tcl/board/stm32f4discovery.cfg
+++ b/tcl/board/stm32f4discovery.cfg
@@ -1,11 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # This is an STM32F4 discovery board with a single STM32F407VGT6 chip.
 # http://www.st.com/internet/evalboard/product/252419.jsp
 
-source [find interface/stlink-v2.cfg]
+source [find interface/stlink.cfg]
 
 transport select hla_swd
 
+# increase working area to 64KB
+set WORKAREASIZE 0x10000
+
 source [find target/stm32f4x.cfg]
 
-# use hardware reset, connect under reset
-reset_config srst_only srst_nogate
+reset_config srst_only