target/board: Add Ampere QS|MQ config files

[fw/openocd] / tcl / board / stm32439i_eval_stlink.cfg

diff --git a/tcl/board/stm32439i_eval_stlink.cfg b/tcl/board/stm32439i_eval_stlink.cfg
index 5b57e1a16912ae7ff403884454194c722838a8a3..b722ce67c1887088c3e5f96980bfe9d878bfab3e 100644 (file)
--- a/tcl/board/stm32439i_eval_stlink.cfg
+++ b/tcl/board/stm32439i_eval_stlink.cfg
@@ -4,7 +4,9 @@
 #
 # This is for using the onboard STLINK/V2
 
-source [find interface/stlink-v2.cfg]
+source [find interface/stlink.cfg]
+
+transport select hla_swd
 
 # increase working area to 128KB
 set WORKAREASIZE 0x20000
@@ -12,7 +14,6 @@ set WORKAREASIZE 0x20000
 # chip name
 set CHIPNAME STM32F439NIH6
 
-source [find target/stm32f4x_stlink.cfg]
+source [find target/stm32f4x.cfg]
 
-# use hardware reset, connect under reset
-reset_config srst_only srst_nogate
+reset_config srst_only