tcl/board: add SPDX tag

[fw/openocd] / tcl / board / stm320518_eval_stlink.cfg

diff --git a/tcl/board/stm320518_eval_stlink.cfg b/tcl/board/stm320518_eval_stlink.cfg
index 0e2ac598203fa3da1c2a1456ee2c9f7e9b534189..153f7e5cbcd4f98ef119cc543ff65b67aa68f504 100644 (file)
--- a/tcl/board/stm320518_eval_stlink.cfg
+++ b/tcl/board/stm320518_eval_stlink.cfg
@@ -1,10 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # STM320518-EVAL: This is an STM32F0 eval board with a single STM32F051R8T6
 # (64KB) chip.
 # http://www.st.com/internet/evalboard/product/252994.jsp
 #
 # This is for using the onboard STLINK/V2
 
-source [find interface/stlink-v2.cfg]
+source [find interface/stlink.cfg]
 
 transport select hla_swd
 
@@ -16,5 +18,4 @@ set CHIPNAME STM32F051R8T6
 
 source [find target/stm32f0x.cfg]
 
-# use hardware reset, connect under reset
-reset_config srst_only srst_nogate
+reset_config srst_only