-adapter_khz 10000
+adapter speed 10000
-interface ftdi
-ftdi_device_desc "Dual RS232-HS"
-ftdi_vid_pid 0x0403 0x6010
+adapter driver ftdi
+ftdi device_desc "Dual RS232-HS"
+ftdi vid_pid 0x0403 0x6010
-ftdi_layout_init 0x0008 0x001b
-ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020
+ftdi layout_init 0x0008 0x001b
+ftdi layout_signal nSRST -oe 0x0020 -data 0x0020
#Reset Stretcher logic on FE310 is ~1 second long
#This doesn't apply if you use
-# ftdi_set_signal, but still good to document
-#adapter_nsrst_delay 1500
+# ftdi set_signal, but still good to document
+#adapter srst delay 1500
set _CHIPNAME riscv
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913
init
#reset -- This type of reset is not implemented yet
if {[ info exists pulse_srst]} {
- ftdi_set_signal nSRST 0
- ftdi_set_signal nSRST z
+ ftdi set_signal nSRST 0
+ ftdi set_signal nSRST z
#Wait for the reset stretcher
#It will work without this, but
#will incur lots of delays for later commands.