tcl/target/imx8m: use hwthread rtos

[fw/openocd] / tcl / board / sayma_amc.cfg

diff --git a/tcl/board/sayma_amc.cfg b/tcl/board/sayma_amc.cfg
index 64c0854285e155b329dff11743f7c8e716f70580..0bd76ba01ebae1049002b383317964cd2519079e 100644 (file)
--- a/tcl/board/sayma_amc.cfg
+++ b/tcl/board/sayma_amc.cfg
@@ -11,19 +11,19 @@
 # which features an Artix 7 FPGA.
 
 adapter driver ftdi
-ftdi_device_desc "Quad RS232-HS"
-ftdi_vid_pid 0x0403 0x6011
-ftdi_channel 0
+ftdi device_desc "Quad RS232-HS"
+ftdi vid_pid 0x0403 0x6011
+ftdi channel 0
 # Use this to distinguish multiple boards by topology
 #adapter usb location 5:1
 # sampling on falling edge generally seems to work and accelerates things but
 # is not fully tested
-#ftdi_tdo_sample_edge falling
+#ftdi tdo_sample_edge falling
 # EN_USB_JTAG on ADBUS7: out, high
 # USB_nTRST on ADBUS4: out, high, but R46 is DNP
-ftdi_layout_init 0x0098 0x008b
-#ftdi_layout_signal EN_USB -data 0x0080
-#ftdi_layout_signal nTRST -data 0x0010
+ftdi layout_init 0x0098 0x008b
+#ftdi layout_signal EN_USB -data 0x0080
+#ftdi layout_signal nTRST -data 0x0010
 reset_config none
 
 adapter speed 5000