tcl/board: add SPDX tag

[fw/openocd] / tcl / board / rsc-w910.cfg

diff --git a/tcl/board/rsc-w910.cfg b/tcl/board/rsc-w910.cfg
index eba44f62d4f5aba0a0fa5e844372378158f06fe9..b07f9405f7798f3e3fc6969bf94ae74ba51a58cb 100644 (file)
--- a/tcl/board/rsc-w910.cfg
+++ b/tcl/board/rsc-w910.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Avalue RSC-W8910 sbc
 # http://www.avalue.com.tw/products/RSC-W910.cfm
 # 2MB NOR Flash
@@ -12,8 +14,8 @@ source [find target/nuc910.cfg]
 #
 reset_config trst_and_srst srst_pulls_trst
 
-adapter_khz 1000
-adapter_nsrst_delay 100
+adapter speed 1000
+adapter srst delay 100
 jtag_ntrst_delay 100
 
 $_TARGETNAME configure -work-area-phys 0x00000000 -work-area-size 0x04000000 -work-area-backup 0
@@ -21,43 +23,46 @@ $_TARGETNAME configure -work-area-phys 0x00000000 -work-area-size 0x04000000 -wo
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME cfi 0x20000000 0x00200000 2 2 $_TARGETNAME
 
+set _NANDNAME $_CHIPNAME.nand
+nand device $_NANDNAME nuc910 $_TARGETNAME
+
 #
 # Target events
 #
 
-$_TARGETNAME configure -event reset-start {adapter_khz 1000}
+$_TARGETNAME configure -event reset-start {adapter speed 1000}
 
 $_TARGETNAME configure -event reset-init {
        # switch on PLL for 200MHz operation
        # running from 15MHz input clock
-       
-       mww 0xB0000200 0x00000030 # CLKEN
-       mww 0xB0000204 0x00000f3c # CLKSEL
-       mww 0xB0000208 0x05007000 # CLKDIV
-       mww 0xB000020C 0x00004f24 # PLLCON0
-       mww 0xB0000210 0x00002b63 # PLLCON1
-       mww 0xB000000C 0x08817fa6 # MFSEL
+
+       mww 0xB0000200 0x00000030 ;# CLKEN
+       mww 0xB0000204 0x00000f3c ;# CLKSEL
+       mww 0xB0000208 0x05007000 ;# CLKDIV
+       mww 0xB000020C 0x00004f24 ;# PLLCON0
+       mww 0xB0000210 0x00002b63 ;# PLLCON1
+       mww 0xB000000C 0x08817fa6 ;# MFSEL
        sleep 10
-       
+
        # we are now running @ 200MHz
        # enable all openocd speed tweaks
-       
+
        arm7_9 dcc_downloads enable
        arm7_9 fast_memory_access enable
-       adapter_khz 15000
-       
+       adapter speed 15000
+
        # map nor flash to 0x20000000
        # map sdram to 0x00000000
-       
-       mww 0xb0001000 0x000530c1 # EBICON
-       mww 0xb0001004 0x40030084 # ROMCON
-       mww 0xb0001008 0x000010ee # SDCONF0
-       mww 0xb000100C 0x00000000 # SDCONF1
-       mww 0xb0001010 0x0000015b # SDTIME0
-       mww 0xb0001014 0x0000015b # SDTIME1
-       mww 0xb0001018 0x00000000 # EXT0CON
-       mww 0xb000101C 0x00000000 # EXT1CON
-       mww 0xb0001020 0x00000000 # EXT2CON
-       mww 0xb0001024 0x00000000 # EXT3CON
-       mww 0xb000102c 0x00ff0048 # CKSKEW
+
+       mww 0xb0001000 0x000530c1 ;# EBICON
+       mww 0xb0001004 0x40030084 ;# ROMCON
+       mww 0xb0001008 0x000010ee ;# SDCONF0
+       mww 0xb000100C 0x00000000 ;# SDCONF1
+       mww 0xb0001010 0x0000015b ;# SDTIME0
+       mww 0xb0001014 0x0000015b ;# SDTIME1
+       mww 0xb0001018 0x00000000 ;# EXT0CON
+       mww 0xb000101C 0x00000000 ;# EXT1CON
+       mww 0xb0001020 0x00000000 ;# EXT2CON
+       mww 0xb0001024 0x00000000 ;# EXT3CON
+       mww 0xb000102c 0x00ff0048 ;# CKSKEW
 }