Luminary-icdi comment update

[fw/openocd] / tcl / board / rsc-w910.cfg

diff --git a/tcl/board/rsc-w910.cfg b/tcl/board/rsc-w910.cfg
index f7095a687407d5d2afe091d3a6a8b0d9a9730d6e..423fb8fd00520e2f881bfbf41df1a4c8e5783723 100644 (file)
--- a/tcl/board/rsc-w910.cfg
+++ b/tcl/board/rsc-w910.cfg
@@ -21,6 +21,9 @@ $_TARGETNAME configure -work-area-phys 0x00000000 -work-area-size 0x04000000 -wo
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME cfi 0x20000000 0x00200000 2 2 $_TARGETNAME
 
+set _NANDNAME $_CHIPNAME.nand
+nand device $_NANDNAME nuc910 $_TARGETNAME
+
 #
 # Target events
 #
@@ -31,11 +34,12 @@ $_TARGETNAME configure -event reset-init {
        # switch on PLL for 200MHz operation
        # running from 15MHz input clock
        
-       mww 0xB0000200 0x45180bb1 # CLKEN
+       mww 0xB0000200 0x00000030 # CLKEN
        mww 0xB0000204 0x00000f3c # CLKSEL
        mww 0xB0000208 0x05007000 # CLKDIV
        mww 0xB000020C 0x00004f24 # PLLCON0
        mww 0xB0000210 0x00002b63 # PLLCON1
+       mww 0xB000000C 0x08817fa6 # MFSEL
        sleep 10
        
        # we are now running @ 200MHz