# Therefore, prefer external power supply.
adapter driver ftdi
-ftdi_device_desc "Mimas Artix 7 FPGA Module"
-ftdi_vid_pid 0x2a19 0x1009
+ftdi device_desc "Mimas Artix 7 FPGA Module"
+ftdi vid_pid 0x2a19 0x1009
# channel 0 is for custom purpose by users (like uart, fifo etc)
# channel 1 is reserved for JTAG (by-default) or SPI (possible via changing solder jumpers)
-ftdi_channel 1
-ftdi_tdo_sample_edge falling
+ftdi channel 1
+ftdi tdo_sample_edge falling
# FTDI Pin Layout
# OE_N is JTAG buffer output enable signal (active-low)
# PROG_B is not used, so left as input to FTDI.
#
-ftdi_layout_init 0x0008 0x004b
+ftdi layout_init 0x0008 0x004b
reset_config none
adapter speed 30000