tcl/target|board: add config Atheros ar2313

[fw/openocd] / tcl / board / netgear-wg102.cfg

diff --git a/tcl/board/netgear-wg102.cfg b/tcl/board/netgear-wg102.cfg
new file mode 100644 (file)
index 0000000..232d2e4
--- /dev/null
+++ b/tcl/board/netgear-wg102.cfg
@@ -0,0 +1,35 @@
+source [find target/atheros_ar2313.cfg]
+
+reset_config trst_and_srst
+
+$_TARGETNAME configure -event reset-init {
+       mips32 cp0 12 0 0x10400000
+
+       # configure sdram controller
+       mww 0xb8300004 0x0e03
+       sleep 100
+       mww 0xb8300004 0x0e01
+       mww 0xb8300008 0x10
+       sleep 500
+       mww 0xb8300004 0x0e02
+
+       mww 0xb8300000 0x6c0088
+       mww 0xb8300008 0x57e
+       mww 0xb8300004 0x0e00
+       mww 0xb8300004 0xb00
+
+       # configure flash
+       #                 0x00000001 - 0x01 << FLASHCTL_IDCY_S
+       #                 0x000000e0 - 0x07 << FLASHCTL_WST1_S
+       # FLASHCTL_RBLE   0x00000400 - Read byte lane enable
+       #                 0x00003800 - 0x07 << FLASHCTL_WST2_S
+       # FLASHCTL_AC_8M  0x00060000 - Size of flash
+       # FLASHCTL_E      0x00080000 - Flash bank enable (added)
+       # FLASHCTL_WP     0x04000000 - write protect. If used, CFI mode wont work!!
+       # FLASHCTL_MWx16  0x10000000 - 16bit mode. Do not use it!!
+       # FLASHCTL_MWx8   0x00000000 - 8bit mode.
+       mww 0xb8400000 0x000d3ce1
+}
+
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0xbe000000 0x00400000 1 1 $_TARGETNAME x16_as_x8