# it's apt-get install libusb-dev. When I made my config I only included
# --enable-jlink and --enable-usbdevs
#
-# I HAVE NOT Tested this throughly, so there could still be problems.
+# I HAVE NOT Tested this thoroughly, so there could still be problems.
# But it should get you way ahead of the game from where I started.
# If you find problems (and fixes) please post them to
# openocd-development@lists.berlios.de and join the developers and
set _ENDIAN little
}
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
} else {
- # force an error till we get a good number
set _CPUTAPID 0x0032409d
}
$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 1
#reset configuration
-adapter_nsrst_delay 100
+adapter srst delay 100
jtag_ntrst_delay 100
reset_config trst_and_srst
# IMPORTANT! See README at top of this file.
#-------------------------------------------------------------------------
- adapter_khz 12000
+ adapter speed 12000
jtag interface
#-------------------------------------------------------------------------
nand device s3c2440 0
- adapter_nsrst_delay 100
+ adapter srst delay 100
jtag_ntrst_delay 100
reset_config trst_and_srst
init