# it's apt-get install libusb-dev. When I made my config I only included
# --enable-jlink and --enable-usbdevs
#
-# I HAVE NOT Tested this throughly, so there could still be problems.
+# I HAVE NOT Tested this thoroughly, so there could still be problems.
# But it should get you way ahead of the game from where I started.
# If you find problems (and fixes) please post them to
# openocd-development@lists.berlios.de and join the developers and
set _ENDIAN little
}
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
} else {
- # force an error till we get a good number
set _CPUTAPID 0x0032409d
}
$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 1
#reset configuration
-adapter_nsrst_delay 100
+adapter srst delay 100
jtag_ntrst_delay 100
reset_config trst_and_srst
# IMPORTANT! See README at top of this file.
#-------------------------------------------------------------------------
- adapter_khz 12000
+ adapter speed 12000
jtag interface
#-------------------------------------------------------------------------
nand device s3c2440 0
- adapter_nsrst_delay 100
+ adapter srst delay 100
jtag_ntrst_delay 100
reset_config trst_and_srst
init
# usb clock are off 12mHz xtal
#-----------------------------------------------
- mww phys 0x4C000014 0x00000005 # Clock Divider control Reg
- mww phys 0x4C000000 0xFFFFFFFF # LOCKTIME count register
- mww phys 0x4C000008 0x00038022 # UPPLCON USB clock config Reg
- mww phys 0x4C000004 0x0007F021 # MPPLCON Proc clock config Reg
+ mww phys 0x4C000014 0x00000005 ;# Clock Divider control Reg
+ mww phys 0x4C000000 0xFFFFFFFF ;# LOCKTIME count register
+ mww phys 0x4C000008 0x00038022 ;# UPPLCON USB clock config Reg
+ mww phys 0x4C000004 0x0007F021 ;# MPPLCON Proc clock config Reg
#-----------------------------------------------
# Configure Memory controller
# DRAM - 64MB - 32 bit bus, uses BANKCON6 BANKCON7
#-----------------------------------------------
- mww phys 0x48000000 0x22111112 # BWSCON - Bank and Bus Width
- mww phys 0x48000010 0x00001112 # BANKCON4 - ?
- mww phys 0x4800001c 0x00018009 # BANKCON6 - DRAM
- mww phys 0x48000020 0x00018009 # BANKCON7 - DRAM
- mww phys 0x48000024 0x008E04EB # REFRESH - DRAM
- mww phys 0x48000028 0x000000B2 # BANKSIZE - DRAM
- mww phys 0x4800002C 0x00000030 # MRSRB6 - DRAM
- mww phys 0x48000030 0x00000030 # MRSRB7 - DRAM
+ mww phys 0x48000000 0x22111112 ;# BWSCON - Bank and Bus Width
+ mww phys 0x48000010 0x00001112 ;# BANKCON4 - ?
+ mww phys 0x4800001c 0x00018009 ;# BANKCON6 - DRAM
+ mww phys 0x48000020 0x00018009 ;# BANKCON7 - DRAM
+ mww phys 0x48000024 0x008E04EB ;# REFRESH - DRAM
+ mww phys 0x48000028 0x000000B2 ;# BANKSIZE - DRAM
+ mww phys 0x4800002C 0x00000030 ;# MRSRB6 - DRAM
+ mww phys 0x48000030 0x00000030 ;# MRSRB7 - DRAM
#-----------------------------------------------
# Now port configuration for enables for memory
# and other stuff.
#-----------------------------------------------
- mww phys 0x56000000 0x007FFFFF # GPACON
+ mww phys 0x56000000 0x007FFFFF ;# GPACON
- mww phys 0x56000010 0x00295559 # GPBCON
- mww phys 0x56000018 0x000003FF # GPBUP (PULLUP ENABLE)
- mww phys 0x56000014 0x000007C2 # GPBDAT
+ mww phys 0x56000010 0x00295559 ;# GPBCON
+ mww phys 0x56000018 0x000003FF ;# GPBUP (PULLUP ENABLE)
+ mww phys 0x56000014 0x000007C2 ;# GPBDAT
- mww phys 0x56000020 0xAAAAA6AA # GPCCON
- mww phys 0x56000028 0x0000FFFF # GPCUP
- mww phys 0x56000024 0x00000020 # GPCDAT
+ mww phys 0x56000020 0xAAAAA6AA ;# GPCCON
+ mww phys 0x56000028 0x0000FFFF ;# GPCUP
+ mww phys 0x56000024 0x00000020 ;# GPCDAT
- mww phys 0x56000030 0xAAAAAAAA # GPDCON
- mww phys 0x56000038 0x0000FFFF # GPDUP
+ mww phys 0x56000030 0xAAAAAAAA ;# GPDCON
+ mww phys 0x56000038 0x0000FFFF ;# GPDUP
- mww phys 0x56000040 0xAAAAAAAA # GPECON
- mww phys 0x56000048 0x0000FFFF # GPEUP
+ mww phys 0x56000040 0xAAAAAAAA ;# GPECON
+ mww phys 0x56000048 0x0000FFFF ;# GPEUP
- mww phys 0x56000050 0x00001555 # GPFCON
- mww phys 0x56000058 0x0000007F # GPFUP
- mww phys 0x56000054 0x00000000 # GPFDAT
+ mww phys 0x56000050 0x00001555 ;# GPFCON
+ mww phys 0x56000058 0x0000007F ;# GPFUP
+ mww phys 0x56000054 0x00000000 ;# GPFDAT
- mww phys 0x56000060 0x00150114 # GPGCON
- mww phys 0x56000068 0x0000007F # GPGUP
+ mww phys 0x56000060 0x00150114 ;# GPGCON
+ mww phys 0x56000068 0x0000007F ;# GPGUP
- mww phys 0x56000070 0x0015AAAA # GPHCON
- mww phys 0x56000078 0x000003FF # GPGUP
+ mww phys 0x56000070 0x0015AAAA ;# GPHCON
+ mww phys 0x56000078 0x000003FF ;# GPGUP
}