tcl/board: add Linksys WAG200G config

[fw/openocd] / tcl / board / linksys-wag200g.cfg

diff --git a/tcl/board/linksys-wag200g.cfg b/tcl/board/linksys-wag200g.cfg
new file mode 100644 (file)
index 0000000..aa4887f
--- /dev/null
+++ b/tcl/board/linksys-wag200g.cfg
@@ -0,0 +1,27 @@
+#
+# Linksys WAG200G Router
+#
+# The stock firmware Flash layout is organized as follow:
+#
+#   Start       End         Device
+#   0x90000000  0x90020000  /dev/mtdblock/2
+#   0x90020000  0x900d0000  /dev/mtdblock/1
+#   0x900d0000  0x903a0000  /dev/mtdblock/0
+#   0x903a0000  0x903e0000  /dev/mtdblock/5
+#   0x903e0000  0x903f0000  /dev/mtdblock/3
+#   0x903f0000  0x90400000  /dev/mtdblock/4
+
+set partition_list {
+    adam2      { "Adam2 bootloader"            0x90000000 0x00020000 }
+    kernel     { "Kernel"                      0x90020000 0x000b0000 }
+    rootfs     { "Root FS"                     0x900d0000 0x002d0000 }
+    lang       { "Minix language part"         0x903a0000 0x00040000 }
+    config     { "Firmware config"             0x903e0000 0x00010000 }
+    adam2env   { "Adam2 environment"           0x903f0000 0x00010000 }
+}
+
+source [find target/ti-ar7.cfg]
+
+# External 4MB MXIC 29LV320MBTC Flash (Manufacturer/Device: 0x00c2 0x227e)
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x90000000 0x00400000 2 2 $_TARGETNAME