tcl: Remove executable bit

[fw/openocd] / tcl / board / hitex_str9-comstick.cfg

diff --git a/tcl/board/hitex_str9-comstick.cfg b/tcl/board/hitex_str9-comstick.cfg
index c85681b186ea4e4425f98241355dc59bcf29e17b..3b9225213df0903d3dcc0ac3b4e33d97b27b2fd7 100644 (file)
--- a/tcl/board/hitex_str9-comstick.cfg
+++ b/tcl/board/hitex_str9-comstick.cfg
@@ -2,12 +2,12 @@
 # http://www.hitex.com/index.php?id=383
 # This works for the STR9-comStick revisions STR912CS-A1 and STR912CS-A2.
 
-source [find interface/hitex_str9-comstick.cfg]
+source [find interface/ftdi/hitex_str9-comstick.cfg]
 
 # set jtag speed
-adapter_khz 3000
+adapter speed 3000
 
-adapter_nsrst_delay 100
+adapter srst delay 100
 jtag_ntrst_delay 100
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst
@@ -31,21 +31,21 @@ if { [info exists ENDIAN] } {
    set  _ENDIAN little
 }
 
-if { [info exists FLASHTAPID ] } {
+if { [info exists FLASHTAPID] } {
    set _FLASHTAPID $FLASHTAPID
 } else {
    set _FLASHTAPID 0x04570041
 }
 jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x25966041
 }
 jtag newtap $_CHIPNAME cpu   -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
-if { [info exists BSTAPID ] } {
+if { [info exists BSTAPID] } {
    set _BSTAPID $BSTAPID
 } else {
    # Found on STR9-comStick, revision STR912CS-A1