drivers/am335xgpio: Migrate to adapter gpio commands

[fw/openocd] / tcl / board / hitex_stm32-performancestick.cfg

diff --git a/tcl/board/hitex_stm32-performancestick.cfg b/tcl/board/hitex_stm32-performancestick.cfg
index 515f7e0801454d2c4d18424806ea5e691d8c63cc..bab59648d9a5eaacb55af6555eaf12016253805b 100644 (file)
--- a/tcl/board/hitex_stm32-performancestick.cfg
+++ b/tcl/board/hitex_stm32-performancestick.cfg
@@ -1,16 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Hitex stm32 performance stick
 
 reset_config trst_and_srst
 
-source [find interface/stm32-stick.cfg]
+source [find interface/ftdi/stm32-stick.cfg]
 
 set  CHIPNAME stm32_hitex
-source [find target/stm32.cfg]
+source [find target/stm32f1x.cfg]
 
 # configure str750 connected to jtag chain
 # FIXME -- source [find target/str750.cfg] after cleaning that up
 jtag newtap str750 cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id 0x4f1f0041
 
 # for some reason this board like to startup @ 500kHz
-adapter_khz 500
-
+adapter speed 500