Add support for Hilscher netX controllers

[fw/openocd] / tcl / board / hilscher_nxsb100.cfg

diff --git a/tcl/board/hilscher_nxsb100.cfg b/tcl/board/hilscher_nxsb100.cfg
new file mode 100644 (file)
index 0000000..f52af44
--- /dev/null
+++ b/tcl/board/hilscher_nxsb100.cfg
@@ -0,0 +1,29 @@
+################################################################################
+# Author: Michael Trensch (MTrensch@googlemail.com)
+################################################################################
+
+source [find target/hilscher_netx500.cfg]
+
+reset_config trst_and_srst
+jtag_nsrst_delay 500
+jtag_ntrst_delay 500
+
+$_TARGETNAME configure -work-area-virt 0x1000 -work-area-phys 0x1000 -work-area-size 0x4000 -work-area-backup 1
+
+$_TARGETNAME configure -event reset-init {
+  halt
+
+  arm7_9 fast_memory_access enable
+  arm7_9 dcc_downloads enable
+
+  sdram_fix
+  
+  puts "Configuring SDRAM controller for MT48LC2M32 (8MB) "
+  mww 0x00100140 0
+  mww 0x00100144 0x03C23251
+  mww 0x00100140 0x030D0001
+
+}
+
+init
+reset init