flash/stm32l4x: STM32L5 support programming when TZEN=1 and RDP=0x55

[fw/openocd] / tcl / board / hilscher_nxhx10.cfg

diff --git a/tcl/board/hilscher_nxhx10.cfg b/tcl/board/hilscher_nxhx10.cfg
index 7ff99165a9007ee6ddf17858889226d7604866bc..1875dacc0ee289591e1f91201310302f53a2d45f 100644 (file)
--- a/tcl/board/hilscher_nxhx10.cfg
+++ b/tcl/board/hilscher_nxhx10.cfg
@@ -34,7 +34,7 @@ proc mread32 {addr} {
 proc init_clocks { } {
   puts "Enabling all clocks "
   set accesskey [mread32 0x101c0070]
-  mww  0x101c0070 [expr $accesskey]
+  mww  0x101c0070 $accesskey
 
   mww  0x101c0028 0x00007511
 }
@@ -42,7 +42,7 @@ proc init_clocks { } {
 proc init_sdrambus { } {
   puts "Initializing external SDRAM Bus 16 Bit "
   set accesskey [mread32 0x101c0070]
-  mww  0x101c0070 [expr $accesskey]
+  mww  0x101c0070 $accesskey
   mww  0x101c0C40 0x00000050
 
   puts "Configuring SDRAM controller for K4S561632E (32MB) "
@@ -79,4 +79,4 @@ $_TARGETNAME configure -event reset-init {
 #flash bank parflash cfi 0xC0000000 0x01000000 2 2 $_TARGETNAME
 
 init
-reset init
\ No newline at end of file
+reset init