tcl/target/stm32f4x: fix name

[fw/openocd] / tcl / board / ek-lm3s9b9x.cfg

diff --git a/tcl/board/ek-lm3s9b9x.cfg b/tcl/board/ek-lm3s9b9x.cfg
index 83f67319bf042657f53e809d3d859570ec452570..6dd7b31a89539fb40c6fb2e3149a6adaa72683c3 100644 (file)
--- a/tcl/board/ek-lm3s9b9x.cfg
+++ b/tcl/board/ek-lm3s9b9x.cfg
@@ -1,22 +1,14 @@
 #
-# Luminary Micro Stellaris LM3S9B9x Evaluation Kits
+# TI/Luminary Stellaris LM3S9B9x Evaluation Kits
 #
-# http://www.luminarymicro.com/products/ek-lm3s9b90.html
-# http://www.luminarymicro.com/products/ek-lm3s9b92.html
+# http://www.ti.com/tool/ek-lm3s9b90
+# http://www.ti.com/tool/ek-lm3s9b92
 #
 
 # NOTE:  using the bundled FT2232 JTAG/SWD/SWO interface is optional!
 # so is using in JTAG mode, as done here.
-source [find interface/luminary-icdi.cfg]
+source [find interface/ftdi/luminary-icdi.cfg]
 
 set WORKAREASIZE 0x4000
 set CHIPNAME lm3s9b9x
 source [find target/stellaris.cfg]
-
-# jtag speed
-adapter_khz 500
-
-adapter_nsrst_delay 100
-
-#LM3S9B9x Evaluation Board has only srst
-reset_config srst_only