flash/nor/at91samd: Use 32-bit register writes for ST-Link compat

[fw/openocd] / tcl / board / ek-lm3s3748.cfg

diff --git a/tcl/board/ek-lm3s3748.cfg b/tcl/board/ek-lm3s3748.cfg
index acc62f6334eb3e0c7c128f2d2627552e10287ce8..705cb64ce01d6eced63ccd62c4c234a2ccd53d89 100644 (file)
--- a/tcl/board/ek-lm3s3748.cfg
+++ b/tcl/board/ek-lm3s3748.cfg
@@ -1,15 +1,16 @@
-# Stellaris lm3s3748 Evaluation Kit
-#  http://www.luminarymicro.com/products/lm3s3748_usb_h_d_evaluation_kits.html
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+#
+# TI/Luminary Stellaris lm3s3748 Evaluation Kits
+#
+# http://www.ti.com/tool/ek-lm3s3748
+#
 
 # NOTE:  using the on-board FT2232 JTAG/SWD/SWO interface is optional!
 # so is using it in JTAG mode, as done here.
-source [find interface/luminary.cfg]
+source [find interface/ftdi/luminary.cfg]
 
 # 20k working area
 set WORKAREASIZE 0x4000
 set CHIPNAME lm3s3748
 source [find target/stellaris.cfg]
-
-# Board has only srst
-reset_config srst_only
-