tcl/board: add SPDX tag

[fw/openocd] / tcl / board / ek-lm3s1968.cfg

diff --git a/tcl/board/ek-lm3s1968.cfg b/tcl/board/ek-lm3s1968.cfg
index e79452c796770d2e55a84340a6fbeac0632458ab..c794a17a01c5861047224906dc9ef3b423103455 100644 (file)
--- a/tcl/board/ek-lm3s1968.cfg
+++ b/tcl/board/ek-lm3s1968.cfg
@@ -1,16 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # TI/Luminary Stellaris LM3S1968 Evaluation Kits
 #
-# http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html
+# http://www.ti.com/tool/ek-lm3s1968
+#
 
 # NOTE:  to use J-Link instead of the on-board interface,
-# you may also need to reduce adapter_khz to be about 1200.
+# you may also need to reduce adapter speed to be about 1200.
 # source [find interface/jlink.cfg]
 
 # include the FT2232 interface config for on-board JTAG interface
 # NOTE:  using the on-board FT2232 JTAG/SWD/SWO interface is optional!
 # so is using in JTAG mode, as done here.
-source [find interface/luminary.cfg]
+source [find interface/ftdi/luminary.cfg]
 
 # include the target config
 set WORKAREASIZE 0x2000