tcl/fpga: add Lattice MachXO3 family support

[fw/openocd] / tcl / board / eir.cfg

diff --git a/tcl/board/eir.cfg b/tcl/board/eir.cfg
index 3754a4227de30d625d389c07deff910a51ace014..d6342499fbadf2c6576adac0b90cc30fd8e25fd9 100644 (file)
--- a/tcl/board/eir.cfg
+++ b/tcl/board/eir.cfg
@@ -1,7 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Elector Internet Radio board
 # http://www.ethernut.de/en/hardware/eir/index.html
 
-source [find target/sam7se512.cfg]
+source [find target/at91sam7se512.cfg]
 
 $_TARGETNAME configure -event reset-init {
        # WDT_MR, disable watchdog
@@ -30,60 +32,60 @@ $_TARGETNAME configure -event reset-init {
        #
 
        # Enable SDRAM control at PIO A.
-       mww 0xfffff474 0x3f800000 # PIO_BSR_OFF
-       mww 0xfffff404 0x3f800000 # PIO_PDR_OFF
+       mww 0xfffff474 0x3f800000 ;# PIO_BSR_OFF
+       mww 0xfffff404 0x3f800000 ;# PIO_PDR_OFF
 
        # Enable address bus (A0, A2-A11, A13-A17) at PIO B
-       mww 0xfffff674 0x0003effd # PIO_BSR_OFF
-       mww 0xfffff604 0x0003effd # PIO_PDR_OFF
+       mww 0xfffff674 0x0003effd ;# PIO_BSR_OFF
+       mww 0xfffff604 0x0003effd ;# PIO_PDR_OFF
 
        # Enable 16 bit data bus at PIO C
-       mww 0xfffff870 0x0000ffff # PIO_ASR_OFF
-       mww 0xfffff804 0x0000ffff # PIO_PDR_OFF
+       mww 0xfffff870 0x0000ffff ;# PIO_ASR_OFF
+       mww 0xfffff804 0x0000ffff ;# PIO_PDR_OFF
 
        # Enable SDRAM chip select
-       mww 0xffffff80 0x00000002 # EBI_CSA_OFF
+       mww 0xffffff80 0x00000002 ;# EBI_CSA_OFF
 
        # Set SDRAM characteristics in configuration register.
        # Hard coded values for MT48LC32M16A2 with 48MHz CPU.
-       mww 0xffffffb8 0x2192215a # SDRAMC_CR_OFF
+       mww 0xffffffb8 0x2192215a ;# SDRAMC_CR_OFF
        sleep 10
 
        # Issue 16 bit SDRAM command: NOP
-       mww 0xffffffb0 0x00000011 # SDRAMC_MR_OFF
+       mww 0xffffffb0 0x00000011 ;# SDRAMC_MR_OFF
        mww 0x20000000 0x00000000
 
        # Issue 16 bit SDRAM command: Precharge all
-       mww 0xffffffb0 0x00000012 # SDRAMC_MR_OFF
+       mww 0xffffffb0 0x00000012 ;# SDRAMC_MR_OFF
        mww 0x20000000 0x00000000
 
        # Issue 8 auto-refresh cycles
-       mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
+       mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF
        mww 0x20000000 0x00000000
-       mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
+       mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF
        mww 0x20000000 0x00000000
-       mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
+       mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF
        mww 0x20000000 0x00000000
-       mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
+       mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF
        mww 0x20000000 0x00000000
-       mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
+       mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF
        mww 0x20000000 0x00000000
-       mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
+       mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF
        mww 0x20000000 0x00000000
-       mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
+       mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF
        mww 0x20000000 0x00000000
-       mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
+       mww 0xffffffb0 0x00000014 ;# SDRAMC_MR_OFF
        mww 0x20000000 0x00000000
 
        # Issue 16 bit SDRAM command: Set mode register
-       mww 0xffffffb0 0x00000013 # SDRAMC_MR_OFF
+       mww 0xffffffb0 0x00000013 ;# SDRAMC_MR_OFF
        mww 0x20000014 0xcafedede
 
        # Set refresh rate count ???
-       mww 0xffffffb4 0x00000013 # SDRAMC_TR_OFF
+       mww 0xffffffb4 0x00000013 ;# SDRAMC_TR_OFF
 
        # Issue 16 bit SDRAM command: Normal mode
-       mww 0xffffffb0 0x00000010 # SDRAMC_MR_OFF
+       mww 0xffffffb0 0x00000010 ;# SDRAMC_MR_OFF
        mww 0x20000000 0x00000180
 
        #
@@ -91,4 +93,3 @@ $_TARGETNAME configure -event reset-init {
        #
        mww 0xfffffd08 0xa5000001
 }
-