Remove annoying end-of-line whitespace from tcl/* files

[fw/openocd] / tcl / board / digi_connectcore_wi-9c.cfg

diff --git a/tcl/board/digi_connectcore_wi-9c.cfg b/tcl/board/digi_connectcore_wi-9c.cfg
index f8b8912287f741b2a15d63c93ec0dc6a218b2468..58f12a6870305143c5aa4be939d8027fc13e210b 100644 (file)
--- a/tcl/board/digi_connectcore_wi-9c.cfg
+++ b/tcl/board/digi_connectcore_wi-9c.cfg
@@ -4,15 +4,15 @@
 
 reset_config trst_and_srst
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME ns9360
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
   # This config file was defaulting to big endian..
    set  _ENDIAN big
 }
@@ -46,17 +46,17 @@ $_TARGETNAME configure -event reset-init {
        mww 0x90600104 0x33313333
        mww 0xA0700000 0x00000001  # Enable the memory controller.
        mww 0xA0700024 0x00000006  # Set the refresh counter 6
-       mww 0xA0700028 0x00000001  # 
+       mww 0xA0700028 0x00000001  #
        mww 0xA0700030 0x00000001  # Set the precharge period
        mww 0xA0700034 0x00000004  # Active to precharge command period is 16 clock cycles
        mww 0xA070003C 0x00000001  # tAPR
        mww 0xA0700040 0x00000005  # tDAL
        mww 0xA0700044 0x00000001  # tWR
-       mww 0xA0700048 0x00000006  # tRC 32 clock cycles  
+       mww 0xA0700048 0x00000006  # tRC 32 clock cycles
        mww 0xA070004C 0x00000006  # tRFC 32 clock cycles
        mww 0xA0700054 0x00000001  # tRRD
        mww 0xA0700058 0x00000001  # tMRD
-       mww 0xA0700100 0x00004280  # Dynamic Config 0 (cs4) 
+       mww 0xA0700100 0x00004280  # Dynamic Config 0 (cs4)
        mww 0xA0700120 0x00004280  # Dynamic Config 1 (cs5)
        mww 0xA0700140 0x00004280  # Dynamic Config 2 (cs6)
        mww 0xA0700160 0x00004280  # Dynamic Config 3 (cs7)
@@ -79,11 +79,11 @@ $_TARGETNAME configure -event reset-init {
        mww 0xA0900000 0x00000002
        mww 0xA0900000 0x00000002
        #
-       mdw 0xA0900000 
-       mdw 0xA0900000 
-       mdw 0xA0900000 
-       mdw 0xA0900000 
-       mdw 0xA0900000 
+       mdw 0xA0900000
+       mdw 0xA0900000
+       mdw 0xA0900000
+       mdw 0xA0900000
+       mdw 0xA0900000
        #
        mww 0xA0700024 0x00000030 # Set the refresh counter to 30
        mww 0xA0700020 0x00000083 # Issue SDRAM MODE command