rename jtag_nsrst_delay as adapter_nsrst_delay

[fw/openocd] / tcl / board / csb732.cfg

diff --git a/tcl/board/csb732.cfg b/tcl/board/csb732.cfg
index 8bf77cb3b348c115a07182dd75a5494dabf42378..4d6f0e489e6fe0e44c4d95e7ac82f114151ec055 100644 (file)
--- a/tcl/board/csb732.cfg
+++ b/tcl/board/csb732.cfg
@@ -3,7 +3,7 @@ source [find target/imx35.cfg]
 
 # Determined by trial and error
 reset_config trst_and_srst combined
-jtag_nsrst_delay 200
+adapter_nsrst_delay 200
 jtag_ntrst_delay 200
 
 $_TARGETNAME configure -event gdb-attach { reset init }
@@ -11,7 +11,7 @@ $_TARGETNAME configure -event reset-init { csb732_init }
 
 # Bare-bones initialization of core clocks and SDRAM
 proc csb732_init { } {
-       
+
        # Disable fast writing only for init
        memwrite burst disable
 
@@ -19,27 +19,27 @@ proc csb732_init { } {
        # We assume the interpreter latency is enough.
 
        # Allow access to all coprocessors
-       arm11 mcr imx35.cpu 15 0 15 1 0 0x2001
+       arm mcr 15 0 15 1 0 0x2001
 
        # Disable MMU, caches, write buffer
-       arm11 mcr imx35.cpu 15 0 1 0 0 0x78
+       arm mcr 15 0 1 0 0 0x78
 
        # Grant manager access to all domains
-       arm11 mcr imx35.cpu 15 0 3 0 0 0xFFFFFFFF
+       arm mcr 15 0 3 0 0 0xFFFFFFFF
 
        # Set ARM clock to 532 MHz, AHB to 133 MHz
        mww 0x53F80004 0x1000
-       
+
        # Set core clock to 2 * 24 MHz * (11 + 1/12) = 532 MHz
        mww 0x53F8001C 0xB2C01
-       
+
        set ESDMISC 0xB8001010
        set ESDCFG0 0xB8001004
        set ESDCTL0 0xB8001000
 
        # Enable DDR
        mww $ESDMISC 0x4
-       
+
        # Timing
        mww $ESDCFG0 0x007fff3f
 
@@ -51,7 +51,7 @@ proc csb732_init { } {
 
        # Enable CS) auto-refresh
        mww $ESDCTL0 0xA2120080
-       
+
        # Refresh twice (dummy writes)
        mww 0x80000000 0
        mww 0x80000000 0
@@ -59,7 +59,7 @@ proc csb732_init { } {
        # Enable CS0 load mode register
        mww $ESDCTL0 0xB2120080
 
-       # Dummy writes  
+       # Dummy writes
        mwb 0x80000033 0x01
        mwb 0x81000000 0x01