Revert "target: remove unused working area 'user' field"

[fw/openocd] / tcl / board / csb337.cfg

diff --git a/tcl/board/csb337.cfg b/tcl/board/csb337.cfg
index dd8bfa2de970ed8da7899bdf049ccbeaa65fd03b..5e225f5f549de04f21d3dabe413cbe130d36ad26 100644 (file)
--- a/tcl/board/csb337.cfg
+++ b/tcl/board/csb337.cfg
@@ -4,7 +4,8 @@
 source [find target/at91rm9200.cfg]
 
 # boots from NOR on CS0:  8 MBytes CFI flash, 16-bit bus
-flash bank cfi 0x10000000 0x00800000 2 2 $_TARGETNAME
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x10000000 0x00800000 2 2 $_TARGETNAME
 
 # ETM9 trace port connector present on this board, 16 data pins.
 if { [info exists ETM_DRIVER] } {
@@ -18,7 +19,7 @@ if { [info exists ETM_DRIVER] } {
 
 proc csb337_clk_init { } {
        # CPU is in Slow Clock Mode (32KiHz) ... needs slow JTAG clock
-       jtag_khz 8
+       adapter_khz 8
 
        # CKGR_MOR:  start main oscillator (3.6864 MHz)
        mww 0xfffffc20 0xff01
@@ -36,7 +37,7 @@ proc csb337_clk_init { } {
        sleep 20
 
        # CPU is in Normal Mode ... allows faster JTAG clock speed
-       jtag_khz 40000
+       adapter_khz 40000
 }
 
 proc csb337_nor_init { } {
@@ -113,4 +114,4 @@ proc csb337_reset_init { } {
 
 $_TARGETNAME configure -event reset-init {csb337_reset_init}
 
-# vim:syntax tcl
+arm7_9 fast_memory_access enable