balloon3 board base config

[fw/openocd] / tcl / board / balloon3-cpu.cfg

diff --git a/tcl/board/balloon3-cpu.cfg b/tcl/board/balloon3-cpu.cfg
new file mode 100644 (file)
index 0000000..8a646b7
--- /dev/null
+++ b/tcl/board/balloon3-cpu.cfg
@@ -0,0 +1,13 @@
+# Config for balloon3 board, cpu JTAG port. http://balloonboard.org/
+# The board has separate JTAG ports for cpu and CPLD/FPGA devices
+# Chaining is done on IO interfaces if desired.
+
+source [find target/pxa270.cfg]
+
+# The board supports separate reset lines
+# Override this in the interface config for parallel dongles
+reset_config trst_and_srst separate
+
+# flash bank <driver> <base> <size> <chip_width> <bus_width>
+# 29LV650 64Mbit Flash
+flash bank cfi 0x00000000 0x800000 2 2 0