# means the master clock (MCLK) must be at or below 133 MHz or timing errors will occur. The processor
# core can operate up to 400 MHz and therefore PCLK must be at or below this to function properly.
- jtag_khz 2 # Slow-speed oscillator enabled at reset, so run jtag speed slow.
+ adapter_khz 2 # Slow-speed oscillator enabled at reset, so run jtag speed slow.
halt # Make sure processor is halted, or error will result in following steps.
mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset.
mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog.
# Switch over to adaptive clocking.
- jtag_khz 0
+ adapter_khz 0
# Enable faster DCC downloads.