target.cfg: remove "-work-area-virt 0"

[fw/openocd] / tcl / board / at91sam9g20-ek.cfg

diff --git a/tcl/board/at91sam9g20-ek.cfg b/tcl/board/at91sam9g20-ek.cfg
index 00ab7fafaa0bd0b615d483123a9795a6cb59bd53..6e8a193469d918b12ccacfaeb6ab80aeeb374186 100644 (file)
--- a/tcl/board/at91sam9g20-ek.cfg
+++ b/tcl/board/at91sam9g20-ek.cfg
@@ -41,8 +41,8 @@ target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNA
 # AT91SAM9G20 has two SRAM areas, one starting at 0x00200000 and the other starting at 0x00300000.
 # Both areas are 16 kB long.
 
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 1
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x4000 -work-area-backup 1
+#$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 1
+$_TARGETNAME configure -work-area-phys 0x00300000 -work-area-size 0x4000 -work-area-backup 1
 
 # If you don't want to execute built-in boot rom code (and there are good reasons at times not to do that) in the
 # AT91SAM9 family, the microcontroller is a lump on a log without initialization.  Because this family has