tcl: move SPDX tag as first line

[fw/openocd] / tcl / board / at91sam9g20-ek.cfg

diff --git a/tcl/board/at91sam9g20-ek.cfg b/tcl/board/at91sam9g20-ek.cfg
index 59ee4d2a38b91d9e6b071c6082d1a772e4e0b2d2..04d9a197cc5a39ede7c6450ff986e3c22d67e4e2 100644 (file)
--- a/tcl/board/at91sam9g20-ek.cfg
+++ b/tcl/board/at91sam9g20-ek.cfg
@@ -40,9 +40,7 @@ at91sam9 rdy_busy 0 0xfffff800 13
 at91sam9 ce 0 0xfffff800 14
 
 proc read_register {register} {
-        set result ""
-        mem2array result 32 $register 1
-        return $result(0)
+       return [read_memory $register 32 1]
 }
 
 proc at91sam9g20_reset_start { } {
@@ -153,7 +151,7 @@ proc at91sam9g20_reset_init { } {
 
        nand probe nandflash_cs3
 
-       # The AT91SAM9G20-EK evaluation board has build-in serial data flash also.
+       # The AT91SAM9G20-EK evaluation board has built-in serial data flash also.
 
        # Now setup SDRAM.  This is tricky and configuration is very important for reliability!  The current calculations
        # are based on 2 x Micron MT48LC16M16A2-75 memory (4 M x 16 bit x 4 banks).  If you use this file as a reference