tcl: remove trailing whitespace

[fw/openocd] / tcl / board / at91sam9g20-ek.cfg

diff --git a/tcl/board/at91sam9g20-ek.cfg b/tcl/board/at91sam9g20-ek.cfg
index 9e0413a1963d4f22ca2827c1959dd2acbf1a3fcd..03296c50e314287b868ed6c2515d82945d843bf7 100644 (file)
--- a/tcl/board/at91sam9g20-ek.cfg
+++ b/tcl/board/at91sam9g20-ek.cfg
@@ -139,13 +139,13 @@ proc at91sam9g20_reset_init { } {
        # (MT29F2G08AACWP) can be established by setting four registers in order:  SMC_SETUP3,
        # SMC_PULSE3, SMC_CYCLE3, and SMC_MODE3.  Computing the exact values of these registers
        # is a little tedious to do here.  If you have questions about how to do this, Atmel has
-       # a decent application note #6255B that covers this process. 
+       # a decent application note #6255B that covers this process.
 
        mww 0xffffec30 0x00020002       ;# SMC_SETUP3 : 2 clock cycle setup for NRD and NWE
        mww 0xffffec34 0x04040404       ;# SMC_PULSE3 : 4 clock cycle pulse for all signals
        mww 0xffffec38 0x00070006       ;# SMC_CYCLE3 : 7 clock cycle NRD and 6 NWE cycle
-       mww 0xffffec3C 0x00020003       ;# SMC_MODE3 : NRD and NWE control, no NWAIT, 8-bit DBW, 
-   
+       mww 0xffffec3C 0x00020003       ;# SMC_MODE3 : NRD and NWE control, no NWAIT, 8-bit DBW,
+
        mww 0xffffe800 0x00000001       ;# ECC_CR : reset the ECC parity registers
        mww 0xffffe804 0x00000002       ;# ECC_MR : page size is 2112 words (word is 8 bits)