tcl: add get_bit & get_bitfield memory helper functions

[fw/openocd] / tcl / board / at91rm9200-dk.cfg

diff --git a/tcl/board/at91rm9200-dk.cfg b/tcl/board/at91rm9200-dk.cfg
index 900ee351d1167127c72620b77a3b3b6e8dbf3fae..b8ec00eab98e3985373ff0f0f0adf56027b9b2a9 100644 (file)
--- a/tcl/board/at91rm9200-dk.cfg
+++ b/tcl/board/at91rm9200-dk.cfg
@@ -5,18 +5,22 @@
 #
 # It has atmel at91rm9200 chip.
 source [find target/at91rm9200.cfg]
+
+reset_config trst_and_srst
+
 $_TARGETNAME configure -event gdb-attach { reset init }
 $_TARGETNAME configure -event reset-init { at91rm9200_dk_init }
 
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash_bank cfi 0x10000000 0x00200000 2 2 0
+#flash bank <name> <driver> <base> <size> <chip_width> <bus_width> <target>
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x10000000 0x00200000 2 2 $_TARGETNAME
 
 
 proc at91rm9200_dk_init { } {
     # Try to run at 1khz... Yea, that slow!
     # Chip is really running @ 32khz
-    jtag_khz 8
-    
+    adapter speed 8
+
     mww 0xfffffc64 0xffffffff
     ##  disable all clocks but system clock
     mww 0xfffffc04 0xfffffffe
@@ -37,14 +41,14 @@ proc at91rm9200_dk_init { } {
     mww 0xfffffc30 0x202
     ## Sleep some - (go read)
     sleep 100
-    
+
     #========================================
     # CPU now runs at 180mhz
     # SYS runs at 60mhz.
-    jtag_khz 40000
+    adapter speed 40000
     #========================================
-    
-    
+
+
     ##  set memc for all memories
     mww 0xffffff60 0x02
     ##  program smc controller
@@ -55,7 +59,7 @@ proc at91rm9200_dk_init { } {
     mww 0xffffff80 0x02
     ##  touch sdram chip to make it work
     mww 0x20000000 0
-    ##  sdram controller mode register 
+    ##  sdram controller mode register
     mww 0xffffff90 0x04
     mww 0x20000000 0
     mww 0x20000000 0