+# SPDX-License-Identifier: GPL-2.0-or-later
+
#
# This is for the "at91rm9200-DK" (not the EK) eval board.
#
#
# It has atmel at91rm9200 chip.
source [find target/at91rm9200.cfg]
+
+reset_config trst_and_srst
+
$_TARGETNAME configure -event gdb-attach { reset init }
$_TARGETNAME configure -event reset-init { at91rm9200_dk_init }
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash_bank cfi 0x10000000 0x00200000 2 2 0
+#flash bank <name> <driver> <base> <size> <chip_width> <bus_width> <target>
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x10000000 0x00200000 2 2 $_TARGETNAME
proc at91rm9200_dk_init { } {
# Try to run at 1khz... Yea, that slow!
# Chip is really running @ 32khz
- jtag_khz 8
-
+ adapter speed 8
+
mww 0xfffffc64 0xffffffff
## disable all clocks but system clock
mww 0xfffffc04 0xfffffffe
mww 0xfffffc30 0x202
## Sleep some - (go read)
sleep 100
-
+
#========================================
# CPU now runs at 180mhz
# SYS runs at 60mhz.
- jtag_khz 40000
+ adapter speed 40000
#========================================
-
-
+
+
## set memc for all memories
mww 0xffffff60 0x02
## program smc controller
mww 0xffffff80 0x02
## touch sdram chip to make it work
mww 0x20000000 0
- ## sdram controller mode register
+ ## sdram controller mode register
mww 0xffffff90 0x04
mww 0x20000000 0
mww 0x20000000 0