tcl: replace FSF boilerplate with SPDX tag

[fw/openocd] / tcl / board / at91eb40a.cfg

diff --git a/tcl/board/at91eb40a.cfg b/tcl/board/at91eb40a.cfg
index 40f2e123fc6bd2a4c157175405ae79f732c113c4..d314e181de14c3877a8b85fd3f22b9a8922ed6a1 100644 (file)
--- a/tcl/board/at91eb40a.cfg
+++ b/tcl/board/at91eb40a.cfg
@@ -16,10 +16,9 @@ if { [info exists ENDIAN] } {
    set  _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
    set _CPUTAPID 0x1f0f0f0f
 }
 
@@ -46,14 +45,14 @@ arm7_9 dcc_downloads enable
 
 #flash driver
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME ecosflash 0x01000000 0x200000 2 2 $_TARGETNAME ecos/at91eb40a.elf
+flash bank $_FLASHNAME cfi 0x01000000 0x200000 2 2 $_TARGETNAME
 
 # required for usable performance. Used for lots of
 # other things than flash programming.
 $_TARGETNAME configure -work-area-phys 0x00030000 -work-area-size 0x10000 -work-area-backup 0
 
 $_TARGETNAME configure -event reset-init {
-       puts "Running reset init script for AT91EB40A"
+       echo "Running reset init script for AT91EB40A"
        # Reset script for AT91EB40a
        reg cpsr 0x000000D3
        mww 0xFFE00020 0x1
@@ -65,4 +64,4 @@ $_TARGETNAME configure -event reset-init {
 }
 
 # This target is pretty snappy...
-jtag_khz 16000
+adapter speed 16000