tcl: ngultra: add target config file

[fw/openocd] / tcl / board / at91eb40a.cfg

diff --git a/tcl/board/at91eb40a.cfg b/tcl/board/at91eb40a.cfg
index 8b05873168c343b2aa4ad82766e8ba4b67fe0319..60c6c6eac4c72e4b76affebd90090366ba57ea47 100644 (file)
--- a/tcl/board/at91eb40a.cfg
+++ b/tcl/board/at91eb40a.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #Script for AT91EB40a
 
 # FIXME use some standard target config, maybe create one from this
@@ -45,7 +47,7 @@ arm7_9 dcc_downloads enable
 
 #flash driver
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME ecosflash 0x01000000 0x200000 2 2 $_TARGETNAME ecos/at91eb40a.elf
+flash bank $_FLASHNAME cfi 0x01000000 0x200000 2 2 $_TARGETNAME
 
 # required for usable performance. Used for lots of
 # other things than flash programming.
@@ -64,4 +66,4 @@ $_TARGETNAME configure -event reset-init {
 }
 
 # This target is pretty snappy...
-adapter_khz 16000
+adapter speed 16000