tcl: add ASUS RT-N66U config

[fw/openocd] / tcl / board / asus-rt-n66u.cfg

diff --git a/tcl/board/asus-rt-n66u.cfg b/tcl/board/asus-rt-n66u.cfg
new file mode 100644 (file)
index 0000000..4b255cf
--- /dev/null
+++ b/tcl/board/asus-rt-n66u.cfg
@@ -0,0 +1,19 @@
+#
+# http://wikidevi.com/wiki/Asus_RT-N66U
+#
+
+echo "ATTENTION: you need to solder a 4.7-10k pullup resistor to pin 21 of flash IC"
+echo "to enable JTAG, see http://wl500g.info/album.php?albumid=28&attachmentid=8991 ,"
+echo "there is an unpopulated footprint near U8.\n"
+
+set partition_list {
+    CFE                { Bootloader                    0xbc000000 0x00040000 }
+    firmware   { "Kernel+rootfs"               0xbc040000 0x01fa0000 }
+    nvram      { "Config space"                0xbdfe0000 0x00020000 }
+}
+
+source [find target/bcm4706.cfg]
+
+# External 32MB NOR Flash (Spansion S29GL256P10TF101
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0xbc000000 0x02000000 2 2 $_TARGETNAME