# openocd does not currently support the on-board USB Blaster II.
# Install the JTAG header and use a USB Blaster instead.
-interface usb_blaster
+adapter driver usb_blaster
source [find target/altera_fpgasoc.cfg]
# If the USB Blaster II were supported, these settings would be needed
-#usb_blaster_vid_pid 0x6810 0x09fb
-#usb_blaster_device_desc "USB-Blaster II"
-
-adapter_khz 100
+#usb_blaster vid_pid 0x09fb 0x6810
+#usb_blaster device_desc "USB-Blaster II"
+adapter speed 100