set -e
##############################################################################
-# Settings section
+# Default settings section
# You probably want to customize those
+# You can also pass them as parameters to the script
##############################################################################
TARGET=arm-none-eabi # Or: TARGET=arm-elf
PREFIX=${HOME}/sat # Install location of your final toolchain
# Set to 1 to be quieter while running
QUIET=0
# Set to 1 to use linaro gcc instead of the FSF gcc
-USE_LINARO=0
+USE_LINARO=1
+# Set to 1 to enable building of OpenOCD
+OOCD_EN=1
# Set to 1 to build libstm32 provided by ST
LIBSTM32_EN=0
# Set to 1 to build libopenstm32 an open source library for stm32
-LIBOPENSTM32_EN=0
+LIBOPENSTM32_EN=1
# Make the gcc default to Cortex-M3
DEFAULT_TO_CORTEX_M3=0
+##############################################################################
+# Parsing command line parameters
+##############################################################################
+
+while [ $# -gt 0 ]; do
+ case $1 in
+ TARGET=*)
+ TARGET=$(echo $1 | sed 's,^TARGET=,,')
+ ;;
+ PREFIX=*)
+ PREFIX=$(echo $1 | sed 's,^PREFIX=,,')
+ ;;
+ DARWIN_OPT_PATH=*)
+ DARWIN_OPT_PATH=$(echo $1 | sed 's,^DARWIN_OPT_PATH=,,')
+ ;;
+ SUDO=*)
+ SUDO=$(echo $1 | sed 's,^SUDO=,,')
+ ;;
+ QUIET=*)
+ QUIET=$(echo $1 | sed 's,^QUIET=,,')
+ ;;
+ USE_LINARO=*)
+ USE_LINARO=$(echo $1 | sed 's,^USE_LINARO=,,')
+ ;;
+ OOCD_EN=*)
+ OOCD_EN=$(echo $1 | sed 's,^OOCD_EN=,,')
+ ;;
+ LIBSTM32_EN=*)
+ LIBSTM32_EN=$(echo $1 | sed 's,^LIBSTM32_EN=,,')
+ ;;
+ LIBOPENSTM32_EN=*)
+ LIBOPENSTM32_EN=$(echo $1 | sed 's,^LIBOPENSTM32_EN=,,')
+ ;;
+ DEFAULT_TO_CORTEX_M3=*)
+ DEFAULT_TO_CORTEX_M3=$(echo $1 | sed 's,^DEFAULT_TO_CORTEX_M3=,,')
+ ;;
+ *)
+ echo "Unknown parameter: $1"
+ exit 1
+ ;;
+ esac
+
+ shift # shifting parameter list to access the next one
+done
+
+echo "Settings used for this build are:"
+echo "TARGET=$TARGET"
+echo "PREFIX=$PREFIX"
+echo "DARWIN_OPT_PATH=$DARWIN_OPT_PATH"
+echo "SUDO=$SUDO"
+echo "QUIET=$QUIET"
+echo "USE_LINARO=$USE_LINARO"
+echo "OOCD_EN=$OOCD_EN"
+echo "LIBSTM32_EN=$LIBSTM32_EN"
+echo "LIBOPENSTM32_EN=$LIBOPENSTM32_EN"
+echo "DEFAULT_TO_CORTEX_M3=$DEFAULT_TO_CORTEX_M3"
+
##############################################################################
# Version and download url settings section
##############################################################################
if [ ${USE_LINARO} == 0 ] ; then
# For FSF GCC:
- GCCVERSION=4.5.1
+ GCCVERSION=4.5.2
GCC=gcc-${GCCVERSION}
GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz
else
# For the Linaro GCC:
- GCCRELEASE=4.5-2010.11-0
- GCCVERSION=4.5-2010.11-1
+ GCCRELEASE=4.5-2011.02-0
+ GCCVERSION=4.5-2011.02-0
GCC=gcc-linaro-${GCCVERSION}
GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCRELEASE}/+download/${GCC}.tar.bz2
fi
-BINUTILS=binutils-2.20
-NEWLIB=newlib-1.18.0
+BINUTILS=binutils-2.21
+NEWLIB=newlib-1.19.0
GDB=gdb-7.2
-LIBCMSIS=v1.10-2
-LIBSTM32=v3.0.0-1
+OOCD=master
+LIBCMSIS=v1.10-3
+LIBSTM32=v3.0.0-2
LIBSTM32USB=v3.0.1-1
LIBOPENSTM32=master
# Flags section
##############################################################################
-CPUS=$(getconf _NPROCESSORS_ONLN)
+if which getconf > /dev/null; then
+ CPUS=$(getconf _NPROCESSORS_ONLN)
+else
+ CPUS=1
+fi
PARALLEL=-j$((CPUS + 1))
echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag"
--with-gmp=${DARWIN_OPT_PATH} \
--with-mpfr=${DARWIN_OPT_PATH} \
--with-mpc=${DARWIN_OPT_PATH} \
- -with-libiconv-prefix=${DARWIN_OPT_PATH}"
+ --with-libiconv-prefix=${DARWIN_OPT_PATH}"
+ OOCD_CFLAGS="-I/opt/mine/include -I/opt/local/include"
+ OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib"
+ ;;
+ CYGWIN*)
+ echo "Found CygWin that means Windows most likely."
;;
*)
echo "Found unknown OS. Aborting!"
fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz
fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2
+if [ ${OOCD_EN} != 0 ]; then
+if [ ! -e openocd-${OOCD}.tar.bz2 ]; then
+ log "Cloning OpenOCD sources..."
+ git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD}
+ cd openocd-${OOCD}
+ ./bootstrap
+ cd ..
+ tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD}
+ #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \
+ # bzip2 --stdout > ../openocd-${OOCD}.tar.bz2
+ rm -rf openocd-${OOCD}
+fi
+fi
+
if [ ${LIBSTM32_EN} != 0 ]; then
if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then
log "Cloning libcmsis sources..."
rm -rf build/* ${BINUTILS}
fi
-if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then
- unpack ${GCC} boot
- cd build
- log "Configuring ${GCC}-boot"
- ../${GCC}/configure --target=${TARGET} \
- --prefix=${PREFIX} \
- --enable-interwork \
- --enable-multilib \
- --enable-languages="c" \
- --with-newlib \
- --without-headers \
- --disable-shared \
- --with-gnu-as \
- --with-gnu-ld \
- --disable-nls \
- --disable-werror \
- --with-system-zlib \
- ${GCCFLAGS}
- log "Building ${GCC}-boot"
- make ${MAKEFLAGS} all-gcc
- install ${GCC}-boot install-gcc
- cd ..
- log "Cleaning up ${GCC}-boot"
- touch ${STAMPS}/${GCC}-boot.build
- rm -rf build/* ${GCC}
-fi
-
-if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then
+if [ ! -e ${STAMPS}/${GCC}-${NEWLIB}.build ]; then
+ unpack ${GCC}
unpack ${NEWLIB}
- cd build
- log "Configuring ${NEWLIB}"
- ../${NEWLIB}/configure --target=${TARGET} \
- --prefix=${PREFIX} \
- --enable-interwork \
- --enable-multilib \
- --with-gnu-as \
- --with-gnu-ld \
- --disable-nls \
- --disable-werror \
- --disable-newlib-supplied-syscalls \
- --with-float=soft
- log "Building ${NEWLIB}"
- make ${MAKEFLAGS} CFLAGS_FOR_TARGET="-msoft-float" CCASFLAGS="-msoft-float"
- install ${NEWLIB} install
- cd ..
- log "Cleaning up ${NEWLIB}"
- touch ${STAMPS}/${NEWLIB}.build
- rm -rf build/* ${NEWLIB}
-fi
-# Yes, you need to build gcc again!
-if [ ! -e ${STAMPS}/${GCC}.build ]; then
- unpack ${GCC}
+ log "Adding newlib symlink to gcc"
+ ln -f -s `pwd`/${NEWLIB}/newlib ${GCC}
+ log "Adding libgloss symlink to gcc"
+ ln -f -s `pwd`/${NEWLIB}/libgloss ${GCC}
+
+ if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then
+ log "Patching gcc to add multilib support"
+ cd ${GCC}
+ patch -p0 -i ../patches/patch-gcc-config-arm-t-arm-elf.diff
+ cd ..
+ fi
+
cd build
- log "Configuring ${GCC}"
+ log "Configuring ${GCC} and ${NEWLIB}"
../${GCC}/configure --target=${TARGET} \
--prefix=${PREFIX} \
--enable-interwork \
--enable-multilib \
--enable-languages="c,c++" \
--with-newlib \
- --disable-shared \
--with-gnu-as \
--with-gnu-ld \
- --disable-nls \
+ --disable-nls \
+ --disable-shared \
+ --disable-threads \
+ --with-headers=newlib/libc/include \
+ --disable-libssp \
+ --disable-libstdcxx-pch \
+ --disable-libmudflap \
+ --disable-libgomp \
--disable-werror \
- --with-system-zlib \
- ${GCCFLAGS}
- log "Building ${GCC}"
+ --with-system-zlib \
+ --disable-newlib-supplied-syscalls \
+ ${GCCFLAGS}
+ log "Building ${GCC} and ${NEWLIB}"
make ${MAKEFLAGS}
install ${GCC} install
cd ..
- log "Cleaning up ${GCC}"
- touch ${STAMPS}/${GCC}.build
- rm -rf build/* ${GCC}
+ log "Cleaning up ${GCC} and ${NEWLIB}"
+ touch ${STAMPS}/${GCC}-${NEWLIB}.build
+ rm -rf build/* ${GCC} ${NEWLIB}
fi
if [ ! -e ${STAMPS}/${GDB}.build ]; then
rm -rf build/* ${GDB}
fi
+if [ ${OOCD_EN} != 0 ]; then
+if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then
+ unpack openocd-${OOCD}
+ cd build
+ log "Configuring openocd-${OOCD}"
+ CFLAGS="${CFLAGS} ${OOCD_CFLAGS}" \
+ LDFLAGS="${LDFLAGS} ${OOCD_LDFLAGS}" \
+ ../openocd-${OOCD}/configure --enable-maintainer-mode \
+ --prefix=${PREFIX} \
+ --enable-dummy \
+ --enable-ft2232_libftdi \
+ --enable-usb_blaster_libftdi \
+ --enable-ep93xx \
+ --enable-at91rm9200 \
+ --enable-presto_libftdi \
+ --enable-usbprog \
+ --enable-jlink \
+ --enable-vsllink \
+ --enable-rlink \
+ --enable-arm-jtag-ew
+ log "Building openocd-${OOCD}"
+ make ${MAKEFLAGS}
+ install openocd-${OOCD} install
+ cd ..
+ log "Cleaning up openocd-${OOCD}"
+ touch ${STAMPS}/openocd-${OOCD}.build
+ rm -rf build/* ${OOCD}
+fi
+fi
+
if [ ${LIBSTM32_EN} != 0 ]; then
if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then
unpack libcmsis-${LIBCMSIS}